Maintaining the beauty and functionality of your sink over time is extremely simple. Just wipe the surface every day with water, dishwashing detergent and a soft cloth, and avoid letting deposits and residue act on the surfaces for long periods.
Cleaning your Elleci composite sink is quick and simple. Even though the non-porous surface prevents liquids penetrating into the material, it is preferable to remove them immediately using a soft, non-abrasive sponge and a neutral detergent or dishwashing liquid. You should then rinse the surface and dry it carefully using a microfiber cloth. The following is a simple procedure in consecutive steps illustrating the correct method for cleaning a black/dark sink:
1) Remove any soiling resulting from daily use using an ordinary neutral detergent or common dishwashing liquid, diluting it with warm water and wiping the surfaces with a
cloth or soft sponge using small circular movements
2) Rinse surfaces thoroughly with lukewarm water
3) Dry damp sections carefully using a microfiber cloth to prevent limescale stains from forming
4) To prevent limescale stains from forming on the product, it is also recommended that it be treated once or twice a week using an anti-limescale cleaner.
Daily Cleaner is a line of products specifically designed to facilitate cleaning and to maintain the beauty of Elleci composite sinks over time.
Daily Cleaner is designed for everyday operations and consists of two solutions:
– Active Sgrassante degreaser, indicated for Granitek and Keratek Plus composite sinks
– Active Anticalcare limescale remover, suitable for Granitek and Keratek Plus composite sinks
The Elleci Beauty line also includes Fast Clean microfiber cloths and Fast Clean sponges, designed and manufactured specifically for the application of Daily products.
Active Sgrassante is a spray that removes stubborn stains while being kind to surfaces. The product should be used for periodic cleaning of Elleci sinks.
The correct procedure for use is as follows:
– Spray Active Sgrassante onto the surface to be treated
– Leave to act for a few seconds
– Clean the surface using a soft sponge
– Rinse and dry the surface thoroughly using a soft or non-scratch microfiber cloth.
This limescale spray acts by dissolving limescale build-up but does not damage surfaces. The product should be used for periodic cleaning of Elleci sinks.
The correct procedure for use is as follows:
– Spray Active Anticalcare onto the surface to be treated
– Leave to act for a few seconds
– Clean the surface using a soft sponge
– Rinse and dry the surface thoroughly using a soft or non-scratch microfiber cloth.
Maintaining the beauty and functionality of your light-colored composite sink over time is extremely simple. Cleaning stubborn stains is not difficult: all you need to do is choose the right product and use it correctly.
For stubborn stains on light-colored products, you can use a solution of bleach and warm water (¾ to ¼), leaving it to act for around eight hours (we recommend that this cleaning be performed during the night). Afterwards, rinse thoroughly and dry the entire surface carefully using a microfiber cloth. If the stains remain, the operation can be repeated one or two more times.
With Deep Cleaner, targeted interventions require effective solutions.
Deep Cleaner is the line designed for periodic penetrating operations, created to care for any material.
The line comprises Extra Action for Keratek Plus and Extra Action for Granitek, gentle creams that provide maximum protection for sinks.
The Elleci Beauty line also includes Fast Clean microfiber cloths and Fast Clean sponges, designed and manufactured specifically for the application of Deep products.
To remove limescale stains, we recommend the use of a non-corrosive descaling product diluted with warm water, to be evenly distributed over the entire surface of the product. Clean with a soft, non-abrasive sponge using small circular movements and leaving the product to act for a few minutes (follow the instructions and conditions for use on the product label). When finished, rinse using warm water and dry carefully using a microfiber cloth.
Daily Clean descaling spray is recommended for the removal of limescale stains.
This limescale spray acts by dissolving limescale build-up but does not damage surfaces. The product should be used for periodic cleaning of Elleci sinks.
The correct procedure for use is as follows:
– Spray Active Anticalcare onto the surface to be treated
– Leave to act for a few seconds
– Clean the surface using a soft sponge
– Rinse and dry the surface thoroughly using a soft or non-scratch microfiber cloth.
To ensure that there is no change to the characteristics the product, we recommend that users observe the following precautions:
– dry the surface of the product every day to avoid prolonged exposure to water that could lead to the build-up of limescale
– do not use detergents that contain alkaline substances and aggressive liquids (such as ammonia, caustic soda or drain cleaners)
– do not remove traces of soiling using steel scourers or abrasive sponges that could damage the surface
– do not cut or chop directly on the surface of the product because this could cause irreparable scratches (the use of a chopping board is recommended)
– avoid accidental knocks that could cause irreparable micro-damage
– do not place hot cookware, pans or coffee makers directly on the sink surface: stains from discoloration and/or damage could form in areas where hot items are placed
– avoid pouring boiling liquids directly into the sink without first turning on the cold tap and filling the sink with at least 1 cm of water, as this could damage the product
– to prevent the build-up of limescale, it is recommended that a descaling treatment be completed at least once a week. This is required in particular for dark-colored sinks.
Daily Cleaner is a line of products specifically designed to facilitate cleaning and to maintain the beauty of Elleci composite sinks over time.
Daily Cleaner is a line designed for everyday operations and consists of two solutions:
– Active Sgrassante degreaser, indicated for Granitek and Keratek Plus composite sinks
– Active Anticalcare limescale remover, suitable for Granitek and Keratek Plus composite sinks
The Elleci Beauty line also includes Fast Clean microfiber cloths and Fast Clean sponges, designed and manufactured specifically for the application of Daily products.
This stain-removing cream removes stubborn stains from all Elleci Granitek sinks. The product should be used for extraordinary cleaning of Elleci sinks.
The correct procedure for use is as follows:
– Apply Extra Action to a dry surface
– Leave to act for five to ten minutes
– Clean with a soft sponge using small circular movements
– Rinse and dry thoroughly using a soft or non-scratch microfiber cloth.
In the case of persistent residues or stains, repeat the procedure several times.
This stain-removing cream removes stubborn stains from all Elleci Keratek Plus sinks. The product should be used for extraordinary cleaning of Elleci sinks.
The correct procedure for use is as follows:
– Apply Extra Action to a dry surface
– Leave to act for five to ten minutes
– Clean with a soft sponge using small circular movements
– Rinse and dry thoroughly using a soft or non-scratch microfiber cloth
In the case of persistent residues or stains, repeat the procedure several times.
Various solutions can be used to remove stains or halos from stainless steel sinks depending on the extent of the stain and how stubborn and difficult it is to remove. To apply a natural cleaning procedure:
1. Pour water and baking soda into a bowl.
2. Take a soft sponge.
3. Wet the sponge and wipe it over the stained area.
4. Rinse and dry using a microfiber cloth.
We recommend repeating the operation several times to achieve an effective treatment result.
To give brightness and shine to a steel sink, there is a quick, natural method you can use.
First, a damp cloth should be wiped over the surface of the sink to remove any soiling and food residue. Once it has been completely dried with a sheet of kitchen paper, you can
apply small doses of mineral oil to a soft cloth to wipe over the entire area. Once the procedure has been completed, you will need to polish the entire surface.
Discover the collection dedicated to the care and maintenance of Elleci products.